Table of Contents
Advertisement
Installation Information
Door Adjustment (424-2, 424FS-2)
NOTE: Unit must be level before adjusting door.
NOTE: If 424FS-2 door needs adjusting, stainless steel
wrap must be removed to adjust top cabinet hinge (See
Figure 2-14).
If unit is properly installed, blocked and leveled, it may
still be necessary to adjust door left to right and/or in
and out. Adjustments are performed at top and/or bot-
tom cabinet hinge(s) (See Figure 2-15).
1. Working on only one hinge at a time (top or bottom),
remove and discard two small Phillips head shipping
screws from cabinet hinge before attempting adjust-
ments.
2. Using a 1/8" Allen-wrench, loosen and "re-snug" cab-
inet hinge screws, allowing door adjustment.
3. Adjust door as required.
4. After adjusting door, tighten cabinet hinge screws
and check for proper door seal.
Door and/or Drawer Adjustment (427-2 & 427R-2)
NOTE: Door and/or drawers on models 427-2 & 427R-
2 are non-adjustable. Instead, door and/or drawer pan-
els must be adjusted if there is alignment problems.
Refer to Installation Manual.
NOTE: Unit must be level before adjusting door and/or
drawer panels.
Door Adjustment (430-2)
If unit is properly installed, blocked and leveled, it may
still be necessary to adjust door left to right and/or in
and out. Adjustments are performed at top and/or bot-
tom door hinge(s) (See Figure 2-16).
1. Working on only one hinge at a time (top or bottom),
remove and discard two small Phillips head shipping
screws from door hinge before attempting adjust-
ments.
2. Using a 1/8" Allen-wrench, loosen and "re-snug" door
hinge screws, allowing door adjustment.
3. Adjust door as required.
4. After adjusting door, tighten door hinge screws and
check for proper door seal.
#3758410 - Revision C - May, 2014
Wine Storage
Wine Storage
1. Remove
back brackets.
Figure 2-14. Wrap Removal
Remove shipping
screws.
Loosen and re-snug
cabinet hinge
screws.
Figure 2-15. Door / Top Cabinet Hinge Adjustment
Door Hinge
Figure 2-16. Door / Top Door Hinge Adjustment
2-6
Series
Series
2
2
(400-
)
(400-
)
Cabinet Hinge
Top
Shipping Screws
Door Hinge Screws
2. Slide
wrap
forward
& lift up
Hide quick links:
Advertisement
Table of Contents
