Group Setting - Nissin MG10 Instruction Manual

Basic Groups and Advanced groups
There are basic groups and advance groups for controlling the Nissin Air10s. They
allow the user to pair an unlimited amount of slave units. They mainly divided into
two kinds of groups:
Basic groups and advance groups can be
use at the same time for different strobes.
Example:
Use the i60A in basic group A on manual,
use two MG10 in advance group A & D in
TTL and manual mode.

Group Setting

MG10, provides individual control of 4 groups (strobes), you can set
these 4 groups in different settings. Before shooting, you have to set
each strobes to be one of these 4 groups.
Nissin MG10 Flash
User can turn the
in changing the group setting.
Nissin Air 10s
Press 1 second to switch basic group and advanced group
TTL mode
M mode
M/TTL mode
Mode Dial to
Camera with
Air 10s
9