Table of Contents
Advertisement
Preparation before use.
Before starting wireless flash shooting.
Inserting batteries
Applicable Battery Type - Alkaline batteries, Lithium batteries or NiMH batteries.
1. Open the battery compartment door.
2. Insert 8 x size AA batteries in battery case
as shown in the picture.
3. Insert the battery case and lock the battery
door. Make sure white dot at same side as
shown in the picture.
CAUTIONS
1. It is recommended to use batteries of the same brand and replace all at the same time.
2. It is recommended to use a qualified rechargeable battery due to environmental
protection and power supply reaction while using. Re-charge the battery before use
3. Wrong insertion of the battery direction or wrong versions of batteries may lead to
malfunction on electrical contacts or damage on MG10.
4. Remove all batteries from MG10 is highly recommended while not in use for long time.
1
2
5
Advertisement
Table of Contents
