Modeling Light - Nissin MG10 Instruction Manual

Modeling light

Normal flashguns have a very short flash duration. In order to estimate and
control the flash more efficiently, the modeling light on slave unit can be used.
It is a constant light for the user to estimate and preview the light
before shooting(flash emitting).
Turn on/off the modeling light
1. Press the Group Selection button(s), the group letter(s) blink.
2. Press
3. Press the Group Selection button again when setup completed.
Adjusting modeling light
1. Press
advanced groups.
2. Press
2. Press
3. Use the
CAUTIONS CAUTIONS
If you do not press any group selection button, which means all group letter in the
display do not blink, pressing the modeling light button will invert the modeling on/off
setting of all groups. For example, A & C: On and B & D: off, press the modeling
light button without selecting any group, will cause to A & C: Off, and B & D: On.
to switch the group's modeling on/off.
on Air 10s for 1 second to switch to the
to change to M mode.
to turn on modeling light.
to adjust the modeling light power.
18