Table of Contents
Advertisement
Zoom head setting
Nissin MG10 offers "A" auto zoom mode and manual zoom mode.
1. Hold the
2. Press the group selection button until the the desired letter(s) blink.
Rotate the Operation Dial to change the Zoom head position setting.
The focal length is representing the flash angle. Rotate the Operation Dial
in anti-clockwise direction to decrease the value of the focal length of zoom head.
Keep rotating anti-clockwise to change the "A" automatic zoom mode at the end.
Rotate the Operation Dial in a clockwise direction to leave.
The "A" auto zoom mode will increase the value of the focal length value of zoom head.
Coverage range supports 24mm, 28mm, 35mm, 50mm, 70mm, 85mm,
105mm, 135mm and 200mm focal length lenses.
mm
M. Zoom
3. Press the group selection button again after completion of the zoom setting.
Hold
for 2 seconds again when all groups zoom settings are completed.
CAUTIONS
CAUTIONS
If you do not press any group selection button, which means all group letters in the
display do not
blink, rotating the Operation Dial to increase or decrease the flash
zoom head focal length will affect all groups; A, B, C and D.
on Air 10s for 2 seconds.
16
Advertisement
Table of Contents
