Set Administrator Number; Clear Administrator Number; Check Administrator Number; Check Airtime - Polygon Technologies Micro Commander GC0101 User Manual

7.1. Set Administrator number

This command can ONLY be sent from the administrator number(if one exists), otherwise it can be
sent from any number .
ADMIN SETADM 0831234567
This will store "0831234567" as the new administrator number. The Micro Commander will reply
with a confirmation message.

7.2. Clear Administrator number

This command can ONLY be sent from the administrator number.
ADMIN CLRADM
This will remove the current administrator number. The Micro Commander will reply with a
confirmation message.

7.3. Check Administrator number

This command can be sent from ANY number, and is useful to determine which number is the correct
administrator number.
ADMIN?
The Micro Commander will reply with the administrator number in the reply message.

7.4. Check Airtime

This command can be sent from ANY number, and is useful to check the amount of airtime remaining
on the unit. To check airtime, you must send:
ATCHECK
The Micro Commander will reply with a message detailing the current airtime.

7.5. Add a Number to the list*

This command can only be sent from the administrator number. To add a number to the list, the
administrator must send:
ADMIN ADDN 0831234567
The Micro Commander will reply with a confirmation message.
*Please Note: The value predefined by the user via the software under the "Numbers Tab" (as
illustrated below), will determine how many numbers are able to be added and removed by means
of SMS.
© Polygon Technologies. All rights reserved
Page 19