Status Leds - Polygon Technologies Micro Commander GC0101 User Manual

5.11. Status LEDs

The Micro Commander has 2 LEDs to show the current status of the Micro Commander. The red LED,
labelled "GSM", shows the status of the internal GSM cellular engine, while the green LED, labelled
"STATUS", shows the status of the Micro Commander as a whole.
The following table shows how one can determine the current status:
GREEN LED (STATUS)
Solid On
➢
on for 500ms, off for 500ms (slow flash)
➢
on for 200ms, off for 200ms (fast flash)
➢
on for 10ms, off for 500ms (2 short flashes per second)
➢
on for 50ms, off for 50ms (very fast flash)
➢
on for 100ms, off for 500ms, on for 100ms, off for 500ms,
➢
on for 500ms, off for 500ms (2 short and 1 long flash)
on for 50ms, off for 100ms, on for 50ms, off for 100ms,
➢
on for 50ms, off for 1000ms (3 short flashes)
RED LED (GSM)
OFF
➢
on for 600ms, off for 600ms (1 flash per second)
➢
on for 75ms, off for 3000ms (1 flash every 3 seconds)
➢
on for 600ms, off for 600ms (1 flash per second)
➢
© Polygon Technologies. All rights reserved
: Busy Booting
: All OK
: Airtime running low
: Signal is low
: Problem with GSM engine
: Setup is corrupt
: Supply voltage below 9,5V
: GSM engine OFF
: GSM engine not finding network
: GSM engine registered OK
: GSM busy with a voice-call
Page 14