Configuration Via Sms - Polygon Technologies Micro Commander GC0101 User Manual

6.2.7. Status Tab
This tab allows the user to monitor the status of Micro Commander (while connected to PC) with
regards to:
Active SIM
➢
GSM Status
➢
GPRS Status
➢
Power Status
➢
Current Battery Voltage
➢
Signal Strength
➢
Airtime Balance Available (provided network settings are correct)
➢
Date / Time
➢
Status of Behaviour Statements
➢
Inputs/Outputs Status
➢

7. CONFIGURATION VIA SMS

The Micro Commander provides functionality to provide some configuration changes to be done via
SMS message (from the administrator number only). Note that the unit cannot be setup by SMS only.
A PC is still required to perform the initial setup. Thereafter, some simple changes to the setup may
be done using SMS messages.
Please note: The Configuration SMS is NOT case sensitive.
The following operations can be performed via SMS message:
Set Administrator number
➢
Clear Administrator number
➢
Check Administrator number
➢
Check Airtime
➢
Add a number to the list
➢
Remove a number from the list
➢
Enable/Disable statements
➢
Configure GPRS settings
➢
Reset GPRS
➢
Set GPRS logging interval
➢
Reset Micro Commander
➢
© Polygon Technologies. All rights reserved
Page 18