Operating Environment; Recommended Wall-Mounting Screws; Cable Entry; Gas - Honeywell Sensepoint XRL Instruction Manual

Operating Environment

Recommended Wall-Mounting Screws

Cable Entry

Gas

Digital Output Version
Electrochemical-cell-type sensors
Catalytic-type sensors
Infrared-type sensors
Operating temperature
Storage temperature
Humidity
Atmospheric pressure
Installation category
Pollution degree
†
Flammable catalytic versions: 10 to 90% RH. Operating the detector outside of this
range may result in increased drift and a reduction in detector accuracy.
Type
Size
ATEX/IECEx
cULus
See Detector Parameters
ranges and other information.
In normal state
0.5 W
1.6 W
1.0 W
−40 to 65 °C (−40 to 140 °F)
0 to 30 °C (32 to 86 °F)
0 to 99% (non-condensing)
90 to 110 kPa
II (UL/CSA/IEC/EN 61010-1)
2 (UL/CSA/IEC/EN 61010-1)
Countersunk, pan head
6 mm (No. 14) diameter × 38 mm (1.5 in) min.
2 × M20
2 × ¾ NPT
on page 40 for a full list of detectable gases,
Introduction
During an alarm
1.0 W
2.0 W
1.5 W
†
11