Main Electronics Module; Wiring Of Ma Output Versions; Power Connection - Honeywell Sensepoint XRL Instruction Manual

2.4 Main Electronics Module

2.5 Wiring of mA Output Versions

Power Connection

1) DOWN button
2) UP button
3) Inhibit level switch
4) Positive voltage output
5) Negative voltage output
6) Current sink/source selection switch
When connecting to DC power, make sure that the polarity is correct.
If AC power is used, ensure that terminal 4 "Common" is used to
connect the power and controller grounds together.
Refer to the circuit diagrams on page 19 and 20.
Installation
17