Power Supply; Outputs; Maximum Power Consumption - Honeywell Sensepoint XRL Instruction Manual

Introduction

Power Supply

Outputs

Maximum Power Consumption

10
Sensepoint XRL requires an isolated power supply unit that is certified
by a national or international standard, such as UL.
Nominal DC input voltage
Nominal AC input voltage
Inrush current
Analog output
Digital output
Modbus RTU Default Communication Setting
Baud rate
Parity
Data bits
Stop bits
Flow control
Refer to Appendix G for details on the Modbus registers.
Adjustable Modbus setting:
• Slave ID: 1 to 254
• Baud rate: 9600, 19200 bps
• Parity: None, Even, Odd
The power consumption varies, depending on output version and
sensor type. Power consumption is taken at nominal input voltage.
Analog Output Version
Electrochemical-cell-type sensors
Catalytic-type sensors
Infrared-type sensors
24 V DC
24 V AC, 50/60 Hz
Less than 850 mA
0 to 22 mA sink or source (configurable)
Modbus RTU
9600 bps
None
8
2
None
In normal state
0.8 W
1.9 W
1.3 W
During an alarm
1.5 W
2.6 W
2.0 W