Standard Mounting; Gutter Mounting (Optional) - Hunter Rain-Clik Owner's Manual & Installation Instructions

Rain sensor with optional freeze shutoff for automatic irrigation systems for use with wr-clik and wrf-clik sensors

Hide thumbs Also See for Rain-Clik:

Table of Contents

Standard Mounting

Using the screws provided with your sensor, mount the

transmitter on any surface where it will be exposed to

unobstructed rainfall, but not in the path of sprinkler

spray. The sensor should be oriented upright (as pictured),

but the swivel bracket can be moved for mounting on

any angled surface. Loosen the locknut and screw before

swiveling the bracket, and then re-tighten.

The sensor gutter mount can be purchased as an optional

accessory for your Wireless Rain-Clik (order p/n SGM).

The SGM allows the transmitter to be mounted directly to

the edge of a gutter. Install the SGM on the transmitter

by removing the metal extension arm supplied with your

sensor and reinstalling the SGM. Position the gutter mount

on the edge of the gutter and twist the thumbscrew to

secure it in place.

Standard Mount

Mounting the Receiver

SGM

Gutter Mount

Table of Contents

Show Quick Links

Table of Contents

Rain-clik