Features - Hunter Rain-Clik Owner's Manual & Installation Instructions

Wireless Rain-Clik sensors attach quickly and easily to
your controller.
Wireless Rain-Clik features include:
1. Quick Response
– Unique technology that turns off
®
the irrigation system immediately rather than after it
has accumulated a fixed amount of rain. No calibration
is required.
2. Maintenance-Free Design
operation for up to 10 years. There are no batteries to
replace.
3. Wireless Operation Up to 800' (275 m)
required between the rain sensor and controller.
4. Two models available: Wireless Rain-Clik (WR-CLIK)
– Acts as a switch to deactivate automatic watering
of your irrigation controller when it rains. Once rain
has stopped and the sensor has dried out, automatic
irrigation will resume.
5. Wireless Rain/Freeze-Clik (WRF-CLIK)
Rain/Freeze-Clik includes a freeze sensor that is
designed to keep the irrigation system from operating
when temperatures drop to 37˚F (3˚C) or below. When
temperatures rise above this temperature, the sensor
will enable automatic watering.
– Provides trouble-free
No wires are
–
– The Wireless
6. Automatic Synchronization
transmitter will send wireless signals every hour to
the receiver to ensure that the sensor and receiver are
continuously synchronized.
7. Lost Communication/Battery Status Indication
Sensor Bypass LED will flash RED if the receiver has not
received a signal from the transmitter. This can indicate
a low or dead battery.

Features

– The Wireless Rain-Clik
– The
5