Advertisement
EN
PARTS LIST
Ref.
Replacement
No.
Part No.
1
See Chart 2
2
MBC-368
3
See Chart 2
4
See Chart 3
*5
GTI-33-K5
6
GTI-425
7
MSV-3-K10
8
---
9
---
10
JGA-4044
*11
JGS-72-K10
*12
MBD-12-K25
*13
JGS-431-K25
*14
JGS-26-K25
*15
JGA-15-K25
*16
JGA-14-K25
17
JGS-449-1
*18
JGV-463-K3
19
34411-122-K10
*20
---
21
JGS-478
22
JGS-477-1
23
JGA-132
24
P-MB-51
25
JGA-497-1
*26
---
*27
SSG-8069-K25
28
JGS-16
*29
---
*30
MBD-19-K10
31
---
32
JGA-4041
33
See Chart 3
34
---
* A quantity of necessary parts is included in Major Repair Kit KK-4987-2 for complete
gun repair and should be kept on hand for service convenience.
Suffixes - K10 designates kits of multiple parts. (Example) JGS-72-K10 is a kit of 10 gaskets.
■ Government NSN No. 4940-01-046-9919 = KK-4987-2.
GTI-33 Baffle Seal Replacement (5)
1. Remove fluid tip (4).
2. Remove baffle (6).
3. Remove seal (5) from baffle.
4. Assemble seal to baffle with angled
side up as shown at right.
NOTE
The seal should be a tight fit
on the baffle. If it is a loose fit
on the baffle, assure that it is
assembled with the angled
side up.
www.carlisleft.com
Description
Air Cap w/ Retaining Ring
Retaining Ring
Air Cap Less Retaining Ring
Fluid Tip
Seal Kit (Kit of 5)
Baffle Assembly
Fluid Inlet Gasket (Kit of 10) PTFE (blue)
Lock Nut
Fluid Inlet Adapter
Fluid Inlet and Nut Kit
Gasket Kit (Kit of 10) (PTFE)
Spring Kit (Kit of 25)
Air Valve Kit (Kit of 25)
U Cup Seal Kit (Kit of 25)
Washer Kit (Kit of 25)
Snap Ring Kit (Kit of 25)
Air Valve Assembly
Packing Kit (Kit of 3)
Packing Nut Kit (Kit of 10)
Screw
Stud and Screw Kit (Kit includes
3 studs and 5 screws)
Trigger, Stud and Screw Kit
(Kit includes 1 each)
Plug
Nipple
Fan Adjustment Assembly
Retaining Ring
O-Ring (Viton) (Kit of 25)
Adjusting Screw
Spring Pad (Included
with # 30 and 32)
Spring Kit (Kit of 10)
Bushing
Bushing, Spring Pad and Knob Kit
Fluid Needle
Gun Body
5. Install baffle on gun.
6. Install fluid tip (4) and tighten to 12-15
ft-lbs.
NOTE
The seal is designed to be a tight
fit on the baffle. The seal should
be able to be removed using
your fingers. If you are unable to
remove the seal using your fingers,
insert a small screwdriver be-
tween the outer lip and the back
of the baffle and pry the seal off.
Individual
Parts Required
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pry here if
necessary
4 / 8
ANGLED SIDE
SEAL
THICK SIDE
BAFFLE
SB-2-252-P (12/2017)
Advertisement
