What It Does - Dexcom G6 Instructions For Use Manual
Hide thumbs
Also See for G6:
- User manual (360 pages) ,
- Instructions for use manual (104 pages) ,
- Start here manual (20 pages)
Table of Contents
Advertisement
What It Does
The G6 sends G6 sensor glucose readings
(G6 readings) to your display device
Use tabs below to set up the app or receiver
Want to set up both? Pick one to set up first and turn to that tab. The last step shows
you how to set up the second display device. Do not use both tabs.
For other ways to learn how to set up your G6:
• Watch the tutorial online at: dexcom.com/IFU/g6/international
• Contact your local Dexcom representative for support
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the G6 and is the answer not in the manual?
Questions and answers
How do I set up new patch and transmitter to my Dexcon 6
To set up a new patch and transmitter for the Dexcom G6, follow these steps:
1. Attach the Transmitter:
- Remove the transmitter from the box.
- Wipe the back of the transmitter with an alcohol wipe and let it dry.
- Avoid touching or scratching the metal contacts.
2. Insert the Transmitter:
- Slide the narrow end of the transmitter into the narrow end of the holder.
- Press the wide end until it clicks into the holder.
3. Secure the Patch:
- Rub your fingers around the transmitter three times to secure the adhesive.
- If the patch starts peeling, use an overpatch or medical tape for extra support.
4. Start the Sensor on the Receiver:
- Wait up to 30 minutes for pairing.
- Tap "Start Sensor" to begin the 2-hour warmup period.
- Keep the receiver within 6 meters of the transmitter.
5. Complete Setup:
- After warmup, tap "Next" to access readings and alerts.
- Optionally, download and set up the Dexcom app on your smart device.
Following these steps ensures proper installation and function of your Dexcom G6 system.
This answer is automatically generated