Dexcom G6 Instructions For Use Manual page 20
Hide thumbs
Also See for G6:
- User manual (360 pages) ,
- Instructions for use manual (104 pages) ,
- Start here manual (20 pages)
Table of Contents
Advertisement
Dexcom, Inc.
6340 Sequence Drive
San Diego, CA 92121 USA
+1.858.200.0200
dexcom.com
Outside US: Contact your local
Dexcom representative
EC REP
MediTech Strategic Consultants B.V.
II Fiore Building B, 3rd Floor
Avenue Ceramique 227
NL - 6221 KX Maastricht
Tel. +31.43.306.3320
Fax (NL): +31.85.208.5746
Fax: +44 20 3318 3827
LBL015882 Rev 001 MT25143
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the G6 and is the answer not in the manual?
Questions and answers
How do I set up new patch and transmitter to my Dexcon 6
To set up a new patch and transmitter for the Dexcom G6, follow these steps:
1. Attach the Transmitter:
- Remove the transmitter from the box.
- Wipe the back of the transmitter with an alcohol wipe and let it dry.
- Avoid touching or scratching the metal contacts.
2. Insert the Transmitter:
- Slide the narrow end of the transmitter into the narrow end of the holder.
- Press the wide end until it clicks into the holder.
3. Secure the Patch:
- Rub your fingers around the transmitter three times to secure the adhesive.
- If the patch starts peeling, use an overpatch or medical tape for extra support.
4. Start the Sensor on the Receiver:
- Wait up to 30 minutes for pairing.
- Tap "Start Sensor" to begin the 2-hour warmup period.
- Keep the receiver within 6 meters of the transmitter.
5. Complete Setup:
- After warmup, tap "Next" to access readings and alerts.
- Optionally, download and set up the Dexcom app on your smart device.
Following these steps ensures proper installation and function of your Dexcom G6 system.
This answer is automatically generated