Changing The Light Bulb; Additional Features - STOVES Richmond 600 Ei User Manual

Removing Telescopic shelves (if fitted)
Before removing the shelves completely, please make sure that the shelf is unclipped from the retaining
tabs.

Changing the light bulb

Not all appliances have the same number and type of bulbs. Before you replace your bulb, check to see
what type you have. Please remember that bulbs are not covered by your warranty.

Additional features

Plate rack (if supplied)
1. Pull the shelf out of the cavity.
2. Tilt the plate warmer towards you and make sure that it hooks underneath the shelf bars at the front.
3. Drop the plate warmer carefully into position.
The plate warmer is now secure and you can place your plates into it.
Always make sure that you use oven gloves if you are putting the plate warmer into a hot, or recently
used oven to prevent burns.
Always make sure that your plates are suitable for warming - some plates may shatter or crack when
exposed to heat.
We recommend that you heat the oven to 70°C, or below, if you are warming plates.
1
Grasp and lift shelf
Lift shelf from the
2
retaining tabs.
Front of appliance