Carrying In The Outdoor Unit - Toshiba MMY-MAP0806HT8P-E Installation Manual

5

Carrying in the outdoor unit

CAUTION
Handle the outdoor unit carefully, observing the following items.
• When using a forklift or other machinery for loading/unloading in transportation, insert the fork of the forklift into
the rectangular holes for handling as shown below.
• When lifting up the unit, insert a rope able to bear the unit's weight into the rectangular holes for handling, and
tie the unit from 4 sides.
(Apply padding in positions where the rope comes into contact with the outdoor unit so that no damage is
caused to the outer surface of the outdoor unit.)
(There are reinforcing plates on the side surfaces, so the rope cannot be passed through.)
Rectangular
Side
holes for
handling
NO GOOD
Front/Back
GOOD
Fork of the
forklift
115-EN
1117101201-3 EN.indd 58 1117101201-3 EN.indd 58
GOOD NO GOOD NO GOOD
Plaster
board
Rope
Plaster
board
Reinforcing
Rectangular
plate
holes for
lifting
Weight centre and weight
¿ Weight centre of an outdoor unit
A. Anchor bolt position B.
700
X
No. Model type X (mm)
MMY-MAP080*
A MMY-MAP100* 510
MMY-MAP120*
MMY-MAP140*
B 595
MMY-MAP160*
MMY-MAP180*
C MMY-MAP200* 790
MMY-MAP220*
– 58 –
Anchor bolt position C. Anchor bolt position
920 1310
X
Weight (kg)
Y (mm) Z (mm)
Heat pump model Cooling only model
355 600 242
360 690 300
360 710 371
X
(Unit : mm)
241
299
370
116-EN
8/8/2559 BE 3:49 PM 8/8/2559 BE 3:49 PM