Single - Sony ILCA-99M2 Manual

Self-timer(Cont):
Shoots a designated number of images using the self-timer after a designated number of
seconds have elapsed since the shutter button was pressed.
Cont. Bracket:
Shoots images while holding the shutter button down, each with different degrees of brightness.
Single Bracket:
Shoots a specified number of images, one by one, each with a different degree of brightness.
WB bracket:
Shoots a total of three images, each with different color tones according to the selected settings
for white balance, color temperature and color filter.
DRO Bracket:
Shoots a total of three images, each at a different degree of D-Range Optimizer.
[62] Shooting Selecting a drive mode (Continuous shooting/Self-timer)
Cont. Shooting
Shoots images continuously while you press and hold down the shutter button.
(Drive Mode) button → [Cont. Shooting].
/
1
You can also set the continuous shooting by selecting MENU→
Settings1) → [Drive Mode].
Select the desired mode by pressing the multi-selector right/left.
2
Menu item details
Continuous Shooting: Hi+ :
Images are shot continuously at the maximum speed while you press and hold down the shutter
button. The aperture value is locked when the first shot is taken.
Continuous Shooting: Hi /
Shooting: Lo:
Subjects are easier to track because the subject is displayed in real-time on the monitor or
viewfinder during shooting.
Number of still images recordable with continuous shooting*
(When [Continuous Shooting: Hi] is selected.)
JPEG L-size Extra fine: 65 images
Continuous Shooting: Mid/
(Camera
Continuous