Sony ILCA-99M2 Manual page 94

Self-timer(Cont.): 2 Sec. 5 Img.
Hint
Press the shutter button again or press the
timer.
Press the /
[65] Shooting Selecting a drive mode (Continuous shooting/Self-timer)
Cont. Bracket
Shoots multiple images while automatically shifting the exposure from base to darker and then
to lighter. You can select an image that suits your purpose after recording.
(Drive Mode) button → [Cont. Bracket].
/
1
You can also set the drive mode by selecting MENU→
[Drive Mode].
Select the desired mode by pressing the multi-selector right/left.
2
Adjust the focus and shoot the image.
3
The base exposure is set at the first shot.
Keep pressing and holding the shutter button until bracket shooting is finished.
Menu item details
For example, the camera shoots a total of three images continuously with an exposure value
shifted by plus or minus 0.3 EV when [Cont. Bracket: 0.3EV 3 Image] is selected.
Note
The last shot is shown on the auto review.
When [ISO AUTO] is selected in [Manual Exposure] mode, the exposure is changed by adjusting the
ISO value. If a setting other than [ISO AUTO] is selected, the exposure is changed by adjusting the
shutter speed.
(Drive Mode) button and select
/ (Drive Mode) button to stop the count of the self-
(Single Shooting) to cancel the self-timer.
(Camera Settings1) →