Sony ILCA-99M2 Manual page 81

Interchangeable lens digital camera
Hide thumbs Also See for ILCA-99M2:
Table of Contents

Advertisement

[52] Shooting
Auto focus
AF Micro Adj.
Allows you to adjust and register autofocused positions for each lens.
In general use, you do not need to adjust the autofocused position using this function. Use this
function only when adjustments are needed for certain focus areas or focal lengths. Note that
the auto focus function may not be performed at a proper position when using this adjustment.
MENU →
1
Select [AF Adjustment Set.] → [On].
2
Adjust the value for the center area.
3
The larger the value you select, the farther the autofocused position will be from the
product. The smaller the value you select, the closer the autofocused position will be to
the product.
To adjust the autofocus position for the dedicated phase detection AF area, set the
value for the center area.
If the adjustment for the center area is not needed, you can skip this step.
Adjust the values for the corner areas as necessary.
4
Set the values for the corner areas if the adjustment of the autofocused positions
outside of the dedicated phase detection AF are needed.
AF micro adjustment areas
Conceptual diagram
You can adjust the autofocus position for both the wide and telephoto ends of the lens. When
(Camera Settings1) → select [AF Micro Adj.].

Advertisement

Table of Contents
loading

Table of Contents