Sony ILCA-99M2 Manual page 332

MENU →
1
Menu item details
Off:
Does not display the zebra pattern.
70/75/80/85/90/95/100/100+/Custom1/Custom2:
Adjusts the brightness level.
Hint
You can register values to check the correct exposure or overexposure as well as the brightness
level for [Zebra]. The settings for correct exposure confirmation and overexposure confirmation are
registered to [Custom1] and [Custom2] respectively in the default settings.
To check the correct exposure, set a standard value and the range for the brightness level. The
zebra pattern will appear on areas that fall within the range you set.
To check the overexposure, set a minimum value for the brightness level. The zebra pattern will
appear over areas with a brightness level equal to or higher than the value you set.
Note
The zebra pattern is not displayed during HDMI connection.
[353] List of MENU items
Grid Line
Sets whether the grid line is displayed or not. The grid line will help you to adjust the
composition of images.
MENU →
1
Menu item details
Rule of 3rds Grid:
Place main subjects close to one of the grid lines that divide the image into thirds for a well-
balanced composition.
Square Grid:
Square grids make it easier to confirm the horizontal level of your composition. This is suitable
to determine the quality of the composition when shooting landscape, close-up, or duplicated
images.
Diag. + Square Grid:
(Camera Settings2) → [Zebra] → desired setting.
Camera Settings2
(Camera Settings2) → [Grid Line] → desired setting.