Single Bracket - Sony ZV-1M2 Help Manual

Help Guide
Digital Camera
ZV-1M2

Single Bracket

Shoots multiple images while automatically shifting the exposure from base to darker and then to lighter. You can select
the image that suits your purpose after recording.
Since a single picture is taken each time you press the shutter button, you can adjust the focus or the composition for
each shot.
Select / (Drive Mode) of the control wheel → [Single Bracket].
1
You can also set the drive mode by selecting MENU →
Select the desired mode using the right/left side of the control wheel.
2
Adjust the focus and shoot the image.
3
Press the shutter button for each image.
Menu item details
For example, when [Single Bracket: 0.3EV 3 Image] is selected, three images are shot one at a time with the exposure
value shifted up and down in increments of 0.3 EV.
Note
When [ISO AUTO] is selected in [Manual Exposure] mode, the exposure is changed by adjusting the ISO value. If a setting other
than [ISO AUTO] is selected, the exposure is changed by adjusting the shutter speed.
When the exposure is compensated, the exposure is shifted based on the compensated value.
Bracket shooting is unavailable in the following shooting modes:
[Intelligent Auto]
[Scene Selection]
When [ Picture Profile] is set to other than [Off]
Related Topic
Bracket Settings
Indicator during bracket shooting
5-049-603-11(1) Copyright 2023 Sony Corporation
169
(Shooting) → [Drive Mode] → [Drive Mode].