Sony ILCA-99M2 Manual page 240

Playback Selection:
Selects the group of images to be shown.
Folder View(Still):
Selects from [All] and [All in Folder].
Date View:
Selects from [All] and [All in Date Rng.].
Interval:
Selects from [Short] and [Long].
Effects*:
Selects from [On] and [Off].
Playback Image Size:
Selects from [HD] and [4K].
The settings are effective only for BRAVIA TV which is compatible with the functions.
*
Note
You can only transfer images that are saved on the memory card in the memory card slot being
played back. To change the memory card slot to be played back, select MENU →
[Select PB Media] → the desired slot.
You can use this function on a TV that supports DLNA renderer.
You can view images on a Wi-Fi Direct-enabled TV or network-enabled TV (including wired network-
enabled TVs).
If you connect TV and this product and do not use Wi-Fi Direct, you need to register your access
point first.
Displaying the images on the TV may take time.
Movies cannot be shown on a TV via Wi-Fi. Use an HDMI cable (sold separately).
[240] Using wireless functions
Loc. Info. Link Set.
You can use the application PlayMemories Mobile to obtain location information from a
smartphone that is connected with your camera using Bluetooth communication. You can
record the obtained location information when shooting images.
Preparation in advance
To use the location information linking function of the camera, the application PlayMemories
Mobile is required.
If "Location Information Linkage" is not displayed on the top page of PlayMemories Mobile, you
need to perform the following steps beforehand.
Reading location information from a smartphone
(Playback) →