Attaching/Removing A - Sony ILCA-99M2 Manual
Interchangeable lens digital camera
Hide thumbs
Also See for ILCA-99M2:
- Instruction manual (104 pages) ,
- Service manual (16 pages) ,
- Instruction manual (104 pages)
Table of Contents
Advertisement
Selecting which memory card to record to (Select Rec.
Media)
Selects the memory card slot on which to record.
[Slot 1] is the default setting. If you do not intend to change the settings and will only use one
memory card, use the slot 1.
MENU →
1
Menu item details
Slot 1:
Selects media in the slot 1.
Slot 2:
Selects media in the slot 2.
Hint
To record the same image on two memory cards at the same time or to sort recorded images onto
two memory card slots by the image type (still image/movie), use [Recording Mode].
Note
The slot 1 supports Memory Stick PRO Duo media and SD cards. The slot 2 supports SD cards only.
[25] Preparing the camera
Attaching/removing a lens
Turn off the camera before attaching or removing the lens.
Remove the body cap (A) from the camera and the rear lens cap (B) from the rear of
1
the lens.
(Setup) → [Select Rec. Media] → desired setting.
Attaching a lens
Advertisement
Table of Contents
