ADJ 18P HEX IP User Instruction Manual page 20

18P Hex IP
Unit Temperature - With this function you can switch the temperature setting between celsius or
fahrenheit.
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Function" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until "Temp" is displayed and press ENTER.
3. Use the UP and DOWN buttons to switch between "Fahren" and "Celsius".
4. Once you have found your desired setting press ENTER.
White Balance Settings - With this function you can adjust RGBWA & UV colors to balance the
white color.
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Function" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until "Settings WhiteBal" is displayed and press ENTER.
3. Use the UP and DOWN buttons to switch between the colors. When you have found the color
you wish to adjust press ENTER. Use the UP or DOWN button to adjust the color values.
4. Once you have made your desired adjustment press ENTER.
Frequency Setting - With this function you can adjust the dimming frequency.
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Function" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until "Fre_hz" is displayed and press ENTER.
3. Use the UP and DOWN buttons to scroll through different frequencies.
4. Once you have found your desired frequency press ENTER.
Gamma Brightness Setting - With this function you can adjust the gamma brightness.
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Function" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until "Gamma" is displayed and press ENTER.
3. Use the UP and DOWN buttons to scroll through different settings.
4. Once you have found your desired setting press ENTER.
Time Information:
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Info" is displayed, and press ENTER.
2. Press the UP or DOWN buttons to scroll through the different information menus. Press ENTER
to access your desired menu.
3. Use the UP and DOWN buttons to scroll through time information menu.
• "TimeInfo Current" - This will display the current running time of the fixture in hours.
• "TimeInfo TotalTim" - This will display the total running time of the fixture in hours.
"TimeInfo LastClea" - This will display the last time the running time was cleared.
"TimeInfo TimerPIN" - This menu function will allow you to clear the running time.
"TempInfo" - This will display the current running temperature
"Model Inf" - This will display the model name.
"ErrorInf" - This will display any error information.
ADJ Products, LLC - www.adj.com - 18P Hex IP User Manual Page 19
Operating Instructions