Putting The System In Diagnostics Mode - Sun Microsystems Netra 440 Diagnostics And Troubleshooting Manual

3. Turn the Locator LED on.
Do one of the following:
From the system console, type
I
# /usr/sbin/locator -n
From the ALOM system controller, type:
I
sc> setlocator on
4. Turn the Locator LED off.
Do one of the following:
From the system console, type:
I
# /usr/sbin/locator -f
From the system controller, type:
I
sc> setlocator off

Putting the System in Diagnostics Mode

Firmware-based diagnostic tests can be bypassed to expedite the server's startup
process. The following procedure ensures that POST and OpenBoot Diagnostics tests
do run during startup. For background information, see
versus Availability" on page
52 Netra 440 Server Diagnostics and Troubleshooting Guide • April 2004
:
14.
"Diagnostics: Reliability