Lift Pump Fuel Pressure (2003-2007) - BD X-MONITOR Installation Manual

6 November 2006
When installation is complete, run the engine and check for leaks.

Lift Pump Fuel Pressure (2003-2007)

The sensor mounts on the high-pressure pump located on the driver's side of the
engine, top/front section. There are two different styles of throttle linkages on the
2003-2007 Dodge Ram pick-ups.
Ship: 88 – 446 Harrison St, Sumas, WA 98295
1085200/5210/5220 Dodge X-Monitor
BD Engine Brake Inc
A10 – 33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Ph: 604.853.6096 Fax: 604.853.8749 Internet: www.bd-power.com
Insert the banjo bolt fitting through
the fuel line.
Install the other washer, and then
insert the fitting into the fuel filter
housing.
Start threading the fitting with your
fingers to prevent cross-threading,
and then secure it hand tight before
tightening with a wrench.
If the throttle linkage is
located near the top of the
engine,
throttle
cover before proceeding.
Once the fuel pressure
port is located, remove
the existing factory banjo
bolt and install supplied
banjo bolt in X-Monitor kit.
When
complete,
engine and check for
leaks.
Mail: PO Box 231, Sumas, WA 98295
15
remove the
linkage plastic
installation is
run the