Table of Contents
Advertisement
6 November 2006
NOTE for 1999 model year
In some of the 1999 model year vehicles, Dodge had a different PCM that would
give a lower reference voltage output than what the conventional PCM used for the
transmission temperature sender throughout the 1998-2003 model years.
ensure that the proper program is being used, measure the voltage on the violet
wire on Pin 1 of plug C2 on the PCM at an ambient temperature of 40-100°F:
2 - 2.75 Volts
1 - 1.75 Volts
* Programming is explained in the "Programming and Set-up" section later in this install manual.
Ship: 88 – 446 Harrison St, Sumas, WA 98295
1085200/5210/5220 Dodge X-Monitor
Conventional Sender
Low Voltage Sender
BD Engine Brake Inc
A10 – 33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Ph: 604.853.6096 Fax: 604.853.8749 Internet: www.bd-power.com
ECM C2
(50-pin block closest to the firewall)
Pin 29 -
Dark green w/ orange tracer wire
Use Program # 1085010 *
Use Program # 1085012 *
Mail: PO Box 231, Sumas, WA 98295
10
To
Advertisement
Table of Contents
