Layout - ADJ MINI DEKKER LZR User Instructions

DMX SET UP (continued)
5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX-512 data cables for DATA transmission in
place of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line. When inserting standard 5-pin data
cables in to a 3-pin line a cable adaptor must be used, these adaptors are readily available at most electric
stores. The chart below details a proper cable conversion.
Conductor
Ground/Shield
Data compliment (- signal)
Data True (+ signal)
Not used
Not used

LAYOUT

1.Function Display: Used to show the various menus and the selected functions.
2.Button:
MENU To select the programming functions
UP To go forward in the selected functions
DOWN To go backward in the selected functions
ENTER To confirm the selected functions
3. DMX IN/OUT: For DMX512 links, use 3-pin XLR plug cable to link the unit together.
4. POWER IN: Used to connect to supply power.
5. Key for Laser: To turn on/off the laser Led. (Only for EU version)
A.D.J. Supply Europe B.V. – www.americandj.eu – Mini Dekker LZR Instruction Manual Page 7
3-Pin XLR to 5-Pin XLR Conversion
3-pin XLR Female (Out)
Pin 1
Pin 2
Pin 3
American Version
Europe Version
5-pin XLR Male (In)
Pin 1
Pin 2
Pin 3
Do Not Use
Do Not Use