Linear Logic ScanGauge II User Manual page 12

Basic Setup Parameters
Setup Parameter
Distance Units
Fuel Units
Temperature Units TEMP UNITS Fahrenheit (˚F)
Pressure Units
Engine Size
Tank Size
Fuel Type
Currency Type
Tips for Setting the Tank Size
The size will use Gallons or Liters depending on the selection you made in the Fuel Units Screen (FUEL
UNITS). If the size in the manual is not in whole units, use the next lower value. For instance, if the
capacity is 17.5 gallons, use 17 gallons.
It is dangerous to run a vehicle out of fuel and can damage the fuel pump. Do
not rely on the fuel gauge or ScanGauge at low fuel levels or low remaining
distance or time.
12 — www.ScanGauge.com
Display Options
DISTANCE Miles
Kilometers
FUEL UNITS Gallons
Liters
Celsius (˚C)
PRESSURE PSI
UNITS KPA
ENGINE SIZE 0.0 - 9.9 (Liters)
TANK SIZE 0 - 255
Gallons/liters
FUEL TYPE GAS
DIESELa
DIESELb
HYBRID
LPG.
$, £, ¥, €
CURRENCY
Description
The Setup Parameters include multiple
units of measure settings, including
Distance, Fuel, Temperature and Pressure.
Each is set independently of the other and
can be used in any combination.
Making changes to these settings causes
your ScanGauge to use these units when
reporting and measuring data.
Increase or decrease the Liters size until it
matches the size of your engine.
Is adjustable in 1-gallon or liter increments
depending on how you set the FUEL
UNITS parameter.
Most diesel vehicles use the DIESELa
setting. See special notes below.
Hybrid vehicles must choose HYBRID or
the ScanGauge will go to sleep when the
engine automatically shuts off.
Set to LPG for propane powered vehicles.
Choose the currency symbol ScanGauge
should use to display monitor values.