Basic Setup Options; Setting Up Your Scangauge; Initial Setup Overview - Linear Logic ScanGauge II User Manual

Setting Up Your ScanGauge

Initial Setup Overview

To properly use your ScanGauge, you must first set up the vehicle parameters. Basic setup param-
eters include engine size, fuel tank size, fuel type and unit of measure. Advanced parameters are also
available and are covered later in this chapter.
Access the Setup Options
To access the setup screens, press the
function button next to MORE on the
Home Screen. Next press the function
button next to SETUP.
Displays the currently selected setup parameter
Use the upper buttons to move to the next or
previous setup parameter
Use the lower buttons to adjust the
currently selected setup parameter
< FUEL UNITS
Loop
< GALLONS
< ENGINE SIZE
< 3.0 Liters
< CURRENCY
< $
> < TEMP UNITS
> <
> < TANK SIZE
> < 15 Gallons
> < ADV SETTINGS
>
See page 14 for Advanced Setup Options
<SCAN
<TRIP
<DISPLAY
<SETUP
< DISTANCE
< MILES
>
°F >
>
>
>
EDIT>
Set Up and Callibration
GAUGE>
MORE>
FILLUP>
MORE>
< PRESSURE UNITS
< PSI
< FUEL TYPE
< GAS
Loop
>
>
>
>
>
>
11