Installing the Security Chain Kit
(continued)
Slide the security pin through the hole in the Leg of
the RR Trolley and secure the pin using the PC Locs
padlock.
The trolley is now secured and should be secured in
this way at the end of every school day.
Fitting Instructions for Weather Cover
Using the Allen Key loosen the bolts that secure the
coloured cleat. Remove one bolt completely.
Cleat
Slide the sleeve on the rear of the Weather
Cover bag over the cleat.
Re-secure the cleat using the small bolts.
Unzip the bag and install the Weather Cover
bag over the Trolley Frame.
NOTE: It is recommended the Weather Cover
be rolled up and packed into the bag when
the laptops are being charged in the trolley.
Congratulations!
Your Revolution Range® ECO Laptop Trolley is now ready for use.
For charging purposes read the instructions of how to use the ECO Safe Charge Power board.
Bolt (inside trolley)
INSTRUCTION MANUAL
Loosen Bolts
Need help?
Do you have a question about the Revolution ECO 16 Bay Trolley and is the answer not in the manual?