To the extent that the law permits, any liability which may be incurred as a result of the use or future use of a product manufactured or sold by PC Locs Pty. Ltd. is limited to the cost of repairing or replacing the failed product or component at the discretion of PC Locs Pty.
16 SCB Sync Station overview The PC Locs 16 SCB unit is a compact and portable robust sync and charge station that provides high current charging and synchronisation capability for up to 16 iPad tablets. Designed specifically to supply the maximum charge capability of up to 2.1A for the iPad/ iPad2 tablet, this unit is also available for other devices on request.
16 SCB Sync Station User InstrUctIons compliance and approvals C-Tick Approval: N26682 Conforms to AS/NZS 60950.1 SAA Approval: SAA111511EA safety instructions For your safety – Do not operate the unit if the plug, power socket, power cable or enclosure is damaged.
User InstrUctIons 16 SCB Sync Station set up 1. If the sync station is in any packaging, remove this to ensure good ventilation and dispose of responsibly. 2. If the sync station is fitted in the trolley/cart drawer, no relocation is necessary.
16 SCB Sync Station User InstrUctIons How to sync multiple devices 1. Connect all the devices required to be synchronised to the sync station USB sockets using only approved USB cables. The devices may be connected to any of the USB sockets, in any order and any sequence.
User InstrUctIons 16 SCB Sync Station troubleshooting 1. If no lights are illuminated with the sync station is switched ON, check the power cable is fully inserted into the sync station socket and the other end is fully inserted into the mains power socket and the switch is ON.
Page 8
PC Locs has been advised of the possibility of such damages. PC Locs obligation is strictly and exclusively limited to the replacement or repair of any defective products.