PC Locs Putnam 16 Instructions

Lockncharge putnam pedestal

Advertisement

INSTRUCTIONS:
PUTNAM PEDESTAL™
Congratulations on your purchase.
Follow these instructions for easy and fast set-up of your Putnam 16 Charging Station.
For video instructions, go to
https://vimeo.com/216952550
Warranty:
PC Locs/LocknCharge warrants the product to be free of defects in design, materials, assembly and craftsmanship from the date of purchase to the original retail
purchaser. Evidence of original purchase will be required to obtain warranty service.
In the event that a defect, malfunction or failure occurs or is discovered during the warranty period, PC Locs/LocknCharge will repair or replace, at its option, the
products which in the reasonable judgment of PC Locs/LocknCharge are deemed defective. All transportation costs shall be borne by the owner and the risk of loss
shall be upon the party initiating the transportation.
The warranty does not apply to any product that has been subject to misuse, tampering, neglect, or accident or as a result of unauthorized alterations or repairs to
the product. The warranty is in lieu of all warranties expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose
which are expressly excluded or disclaimed. In no event will PC Locs/LocknCharge, their directors, officers, employees, or agents be liable for any harm,
consequential, incidental, third party, special or indirect damages whatsoever arising out of the use or inability to use the products even if PC Locs/LocknCharge has
been advised of the possibility of such damages.
PC Locs/LocknCharge obligation is strictly and exclusively limited to the replacement or repair of any defective products. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Disclaimer:
This information is the intellectual property of IWS Global Pty Ltd and may not be distributed, duplicated or copied in part or full without the written permission.
Since the use of this information, the equipment connected and the conditions by which any IWS Global product is used is beyond the control of IWS Global, it is the
obligation of the owner and/or user to determine the correct and safe use of any equipment and product. To the extent that the law permits, any liability which may
be incurred as a result of the use or future use of a product manufactured or sold by IWS Global is limited to the cost of repairing or replacing the failed product or
component at the discretion of IWS Global either within, or outside of warranty periods, and does not extend to any loss or damage which may be caused as a
consequence of misuse or failure of the equipment or product or the information contained herein. IWS Global shall not in any event be liable for economic loss of
profits, indirect, special, bodily injuries or consequential damages.
Specifications and images are for illustration purposes only. Final product may differ and is subject to change without notice.
PC Locs, LocknCharge and the Padlock device are Trademarks of IWS Global Pty Ltd.
Copyright IWS Global Pty Ltd, January 2017.
www.pclocs.com.au
www.lockncharge.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Putnam 16 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PC Locs Putnam 16

  • Page 1 Evidence of original purchase will be required to obtain warranty service. In the event that a defect, malfunction or failure occurs or is discovered during the warranty period, PC Locs/LocknCharge will repair or replace, at its option, the products which in the reasonable judgment of PC Locs/LocknCharge are deemed defective. All transportation costs shall be borne by the owner and the risk of loss shall be upon the party initiating the transportation.
  • Page 2 Position the Charging Station together with the Pedestal in your desired location. Place the Putnam 16 Charging Station on top of the Putnam Pedestal. Wall fixing must be completed to safely use the Putnam 16 Charging Station. The Wall Bracket is designed to prevent the Putnam 16 from tipping over.
  • Page 3 Adjust as required Secure the screws to the and Wall Bracket against the wall Drill holes in wall Secure with nuts Completed installation and insert fixings Repeat this above process for stacking an additional Putnam 16 Charging Station. www.pclocs.com.au www.lockncharge.com...
  • Page 4 Connect the Pedestal cables to the Putnam Cabinet(s). Turn the power ON. Use Putnam 16 Charging Station Power Cord to connect the whole ‘Tower’ to power. Please note how the Pedestal Power Cords connect to two Putnam 16 Charging Stations.

Table of Contents