Table of Contents
Advertisement
3G-TV
Setting up video mail
Using the Configuration menu (MENU 5-5-1-5),
you can change the default settings for sending or
receiving video mail.
The following options are available:
Indicated NUM: When this option is active, the
recipient can see your phone number in your
message.
Indicated S_Result: When this option is active,
the network sends you a report message showing
whether or not your message has been delivered.
Indicated R_Result: When this option is active,
the network sends you a report message showing
whether or not your message has been read by the
recipient.
To change a setting:
1. Select an option and press
2. Select Set to activate the option and press
If you do not want to use the option, select
Cancel.
After saving your setting, the display returns to
the Configuration screen.
3. To set another option, repeat from step 1.
4. To exit, press
or
.
110
.
.
Photo Mail
(MENU 5-5-2)
In this menu, you can send a photo mail using
photos you have taken or downloaded from the
Wireless Web.
Sending a photo mail
To send a message using a photo you take right
now:
1. On the Photo Mail screen, select Send New
PhotoMail and press
.
2. Select With new photo and press
The camera turns on and the display switches to
Capture mode.
3. Take and save a photo by following steps 2 to 6
on page 118.
4. Enter a subject for your message and press
5. Write a message and press
6. Enter the destination number.
Pressing
gives you options which allow you
to find a phone number or e-mail address stored
in Phonebook.
7. To send the message to more than one person,
press
and fill in another destination field.
8. Repeat steps 6 and 7 to add more destinations.
You can enter up to 5 numbers or addresses.
Note: You will be billed for each destination.
9. When you are finished, press
3G-TV
.
.
.
.
111
Advertisement
Table of Contents
