FM-4800 Operator's Manual
"MANUAL", you need to manually change the channel. When you select "AUTO",
the radio automatically switches to the designated channel after 10 seconds without
user intervention.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "DSC SETUP > AUTO CHANGE CH".
Step 2
The following page appears on the screen.
Step 3
Select "MANUAL" or "AUTO".
Press the Menu/DSC control to save the setting and return to the previous
Step 4
screen.
12.4 Individual Acknowledgement
This feature allows you to set the acknowledgement mode of individual call requests.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "DSC SETUP > INDIVIDUAL ACK".
Step 2
The "INDIVIDUAL ACK" page appears on the screen.
Select "MANUAL" or "AUTO".
Step 3
MANUAL: Select the soft key, and then you need to send an
acknowledgement manually upon a call request.
AUTO: Select the soft key, and then the radio sends an
unacknowledged message upon a call request.
Press the Menu/DSC control to save the setting and return to the previous
Step 4
screen.
12.5 Position Acknowledgement
This feature allows you to set the acknowledgement mode of position request calls.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "DSC SETUP > POSITION ACK".
Step 2
73
DSC SETUP