How To Receive A Position Request Call - Furuno FM-4800 Operator's Manual

FM-4800 Operator's Manual
Initiate position request call by manually entering an MMSI
number
On the "POS REQUEST" page, select "MANUAL ID".
Step 1
Rotate and press the Menu/DSC control to enter the MMSI of an individual
Step 2
contact, and then press the Menu/DSC control.

When CH70 is busy, you can wait without pressing any key until CH70
is idle.

When the CH70 is idle, the radio waits for an acknowledgement.
When the radio receives an acknowledgement, the radio screen shows
Step 3
the requested position information. Select the "OK" soft key or the Back
key to return to the home screen.
Note
If the requested vessel cannot obtain its position, your radio will
receive false position information as shown below.
4.7.2

How to Receive a Position Request Call

The "POSITION ACK" has three options: "MANUAL", "AUTO", and "IGNORE". For
information about how to set the "POSITION ACK", see section 12.5 Position
Acknowledgement. When "POSITION ACK" is set to "IGNORE", your radio has no
response or log. When it is set to other values, do as follows.
DIGITAL SELECTIVE CALLING
31