FM-4800 Operator's Manual
15.2 Mounting
15.2.1
How to Install the Radio
For desktop mounting
Put the hanger in a location where it is easy to install the FM-4800 radio.
Step 1
Fix the hanger with four screws.
Step 2
Set the radio to the hanger.
Step 3
Tighten the knob bolts on both sides of the hanger.
Step 4
For flush mounting
Determine the position of installation holes according to the marking
Step 1
template and drill the hole.
Step 2
Pry off the frame from the front panel.
Paste the installation cushion on the back of the front panel.
Step 3
Place the FM-4800 radio in the hole and fix it with four screws.
Step 4
Hanger
Radio
Tapping screw
(PA 4.0*25)
83
INSTALLATION
Hanger Knob