Individual Call - Furuno FS-2570 Operator's Manual

Report as follows using radiotelephone or
NBDP-FEC:
Greet all ships x3 (For example, hello,
hello, hello)
This is (your ship's call sign) x1
Provide information

Individual Call

1. Press the [2/DSC] key and then push the
[ENTER] knob to open the CALL TYPE
menu.
2. Rotate the [ENTER] knob to choose
INDIVIDUAL and then push the [ENTER]
knob.
3. Push the [ENTER] knob to open the
STATION ID menu.
4. Use the numeric keys to key in the ID of
the station where to send the call and
then push the [ENTER] knob.
5. Push the [ENTER] knob to open the
PRIORITY menu.
6. Rotate the [ENTER] knob to choose
desired priority (normally ROUTINE) and
then push the [ENTER] knob.
7. Push the [ENTER] knob to open the COM.
TYPE menu.
8. Rotate the [ENTER] knob to choose
desired communications type and then
push the [ENTER] knob.
9. Push the [ENTER] knob to open the COM.
FREQ menu.
10. Rotate the [ENTER] knob to choose
communication frequency desired and
then push the [ENTER] knob.
11. Push the [ENTER] knob to open the DSC
FREQ menu.
12. Rotate the [ENTER] knob to choose DSC
frequency band desired, select the
frequency pair, and then push the
[ENTER] knob.
13. Press the [CALL] key to send the call.
14. Commence voice (radiotelephone) or
NBDP communications.
( 2 0 0 2 / 1 2 , D A M I ) F S - 1 5 7 0 / 2 5 7 0
2
P U B . N O . O S E – 5 6 3 6 0 – B
NBDP (telex)
Using registered station
1. Press the function key [F3] to display the
Operate menu.
2. Press the [1] key to display the Station
List.
3. Choose the station you wish to call.
4. Press the [Enter] key to establish
connection with the station.
5. Type your message.
6. Press the [F10] key to disconnect the
communications line.
Choosing frequency, station manually
1. Press the function key [F3] to display the
Operate menu.
2. Press the [9] key to choose Set
Frequency.
3. Input frequency pair.
4. Press the [Enter] key.
5. Press the function key [F3] again and
then the [8] key.
6. Choose appropriate communication
mode.
7. Press the [ ] key and input party's ID
number.
8. Press the [Enter] key to connect the
communication line.
For ARQ mode, go to step 9. For FEC
mode, type your message and then go to
step 13.
9. Press the function key [F7]. The party's
answerback code appears on the screen.
Note: Step 9 and 10 are needed for
ship-to-ship calling only.
10. Press the function key [F8]. Your ship's
answerback code is sent to the party.
11. Press the [Enter] key and then type and
transmit your message.
12. If you want to receive the party's
response, press the function key [F9].
13. Press the function key [F10] to
disconnect the communications line.