Cleaning & Maintenance - Apex Digital XT Prime Instruction Manual

English
7. Cleaning & Maintenance
7.1 Cleaning the Main Unit
The main unit should be cleaned regularly (at least every 30 days). To clean the unit, wipe it
down with a damp cloth using a mild detergent. When selecting a cleaning agent, take
precautions to choose one that is not chemically abrasive to the surface of the plastic case. All
parts should be air-dried thoroughly before use. During storage, the unit should be kept in a
dust-free location.
WARNING: Don't try to open this device. Repairs and internal servicing should only performed
by an authorized service agent. Don't drop any subject into the air tube or air
outlet.
7.2 Tubing and Mask
The tubing and mask should be checked and cleaned daily. Please refer to the cleaning
instruction packaged with the accessories.
1. Disconnect the air tubing from the air outlet of the device.
2. Remove the air tubing and headgear straps from the nasal mask.
3. Wash the mask system according to the instructions supplied with it. Wash the air tubing in
warm water using mild detergent.
4. Rinsed thoroughly, hang and allow to dry.
5. Before next use, assemble the mask and headgear according to the mask user instructions.
6. All items of the mask and air tubing are subject to normal wear and tear and may eventually
be replaced. Replace the mask and the air tubing if they are damaged.
CAUTION:
CAUTION:
WARNING:
WARNING:
Do not use blench, chlorine-, alcohol-, or aromatic-based (including all
scented oils), moisturizing or antibacterial soaps to clean the cushion,
mask, air tubing. These solutions may cause hardening and reduce the life
of the product.
Do not wash or dry the mask or air tubing at a temperature above 70°C
(160°F)
Do not use any cleaner containing fragrance or conditioners as they will
leave a residue.
The mask must not be re-used by another person. This is to avoid the risk
of cross-infection.
12