Adding A Humidifier; Using The Sd Card To Collect Data - Apex Digital XT Prime Instruction Manual

English

5. Adding a Humidifier

NOTE: When XT Prime CPAP device is used with the heated humidifier, its power supply is
from the power socket outlet of the heated humidifier. Do not connect the power cord
to CPAP device and plug into main electrical outlet.

6. Using the SD Card to Collect Data

If physicians need to review the usage data, they may ask you to use the SD card to copy data
from the device, and to return the card to them. Data that is copied to the SD Card is still stored
and available on the device.
1. Insert the SD Card when the device is in standby mode.
2. Data copying starts automatically when the SD Card is inserted into the slot.
3. The [COPY] & [Card] messages are displayed on the LCD while data is being copied.
4. The [End] & [OK] messages are displayed on the LCD when copying has finished.
5. Remove the SD Card and mail it to the clinician.
6. The SD card does not need to be uninstalled for the device to work properly.
CAUTION:
XT Prime CPAP device can be used with XT Heated
Humidifier (9S-006500) which is available from the
home care provider. The heated humidifier may reduce
nasal dryness and irritation by providing adequate
moisture and heat to the airflow. Please refer to the XT
heated humidifier (9S-006500) instruction manual for
complete setup information.
Do not remove the SD card until [End] & [OK] messages are displayed on
the LCD, or data copied to the card may be corrupted or missing.
11