Operation - Apex Digital XT Prime Instruction Manual

English

4. Operation

NOTE: Always read the operating instruction before use.
4.1 Control Panel Description
Buttons arrangement on control panel and main use of the buttons:
START/STANDBY
To start the treatment, simply press the "START/STANDBY" button. To stop the
treatment, press the "START/STANDBY" button again. The display will switch
between [STANDBY] and Therapy Pressure [ XX.X cmH
MENU
Press the "MENU" button to enter the setting mode when device is in standby mode.
The adjustment setting includes mode selection, ramp time selection, ramp starting
pressure, therapy pressure adjustment, alarm ON/OFF, clock alarm and clock setting,
compliance meter, and total operating meter. When each setting's value has been
changed, press "MENU" for confirmation and press "MENU" again for next setting
selection. Please refer to 4.2 Function Description section for detailed information.
UP
Press the "UP" button to increase the value.
DOWN
Press the "DOWN" button to decrease the value.
2
7
O] in cmH O unit.
2