COBHAM Explorer 540 Setup Manual

Hide thumbs Also See for Explorer 540:

Pivotel Setup Guide for Cobham Explorer 540

Table of Contents

Need help?

Do you have a question about the Explorer 540 and is the answer not in the manual?

Page 1 Pivotel Setup Guide for Cobham Explorer 540...
Page 2 Pivotel shall not be held liable for any losses or damages incurred by users of this guide. The guide is based on Explorer 540 firmware version 1.0.2 and may differ from other firmware. To edit the terminal settings, please ensure the SIM is installed, power supply cable is connected between the terminal and power supply and a computer is connected to the terminal using a RJ45 cable.
Page 3 3. Automatic Context Activation (ACA) for Standard IP By default you have to manually activate a data connection after the terminal is registered to the network. Please refer to the user manual for methods to manually activate a data connection. You can set up the terminal to automatically establish a data connection when it is registered on the satellite network.
Page 4 5. Accessing The Terminal From A Remote Location By default, remote access with SMS is enabled. Any mobile number can send SMS remote commands to the terminal if they have the phone number of the terminal and the remote SMS password. Please refer to the user manual for the supported SMS remote commands.
Page 5 6. Saving The Terminal Setting Configuration If you need to reuse a configuration in other terminals of the same type, you can save your current configuration to a file that can then be loaded into other terminals. Be aware that if the terminals have different software versions, some of the settings may be different than expected.