D-Link DAP-1610 User Manual page 46

DAP-1610 AC1200 Wi-Fi Range Extender
User Manual
In the Security Settings section, you can change security settings of the wireless network.
By default, the WPA2-PSK network authentication type of the wireless network is specified. WPS
PIN from the barcode label is used as the network key.
Figure 39. Network authentication types supported by the extender.
The extender supports the following authentication types:
Authentication type
Open
WEP
WPA
WPA-PSK
WPA2
WPA2-PSK
WPA/WPA2 mixed
WPA-PSK/WPA2-PSK
mixed
!
The WPA , WPA2 , and WPA/WPA2 mixed authentication types require a RADIUS
server.
Open authentication (with WEP encryption for wireless network
modes not supporting 802.11n or 802.11ac devices).
Shared key authentication with WEP encryption. This authentication
type is not available when on the Wi-Fi / Basic settings page of
the relevant band, in the Wireless mode drop-down list, a mode
supporting 802.11n and ac devices is selected.
WPA-based authentication using a RADIUS server.
WPA-based authentication using a PSK.
WPA2-based authentication using a RADIUS server.
WPA2-based authentication using a PSK.
A mixed type of authentication. When this value is selected, devices
using the WPA authentication type and devices using the WPA2
authentication type can connect to the wireless network.
A mixed type of authentication. When this value is selected, devices
using the WPA-PSK authentication type and devices using the
WPA2-PSK authentication type can connect to the wireless
network.
Page 46 of 91
Configuring via Web-based Interface
Description