Changing Lan Ipv4 Address - D-Link DAP-1610 User Manual

DAP-1610 AC1200 Wi-Fi Range Extender
User Manual

Changing LAN IPv4 Address

This configuration step is available for the Access point, Repeater, and Client modes.
1. Select the Automatic obtainment of IPv4 address to let DAP-1610 automatically
obtain the LAN IPv4 address.
If the extender obtains the LAN IPv4 address automatically, then after finishing the Wizard
!
you can access the web-based interface using the domain name (by default,
dlinkap.local ) with a dot at the end.
If you want to manually assign the LAN IPv4 address for DAP-1610, do not select the Automatic
obtainment of IPv4 address checkbox and fill in the IP address and Netmask fields and, if
needed, the Gateway IP address field. Make sure that the assigned address does not coincide
with the LAN IPv4 address of the router to which your device connects.
2. Click the NEXT button to continue or click the BACK button to return to the previous page.
Figure 24. The page for
Page 29 of 91
changing the LAN IPv4
Configuring via Web-based Interface
address.