D-Link DAP-1610 Quick Install Manual

Ac1200 dual band wi-fi range extender
Hide thumbs

Advertisement

DAP-1610
AC1200 Dual Band Wi-Fi Range Extender
ual Band Wi-Fi Rang
Quick Install Guide
Quick Inst

Advertisement

loading

  Related Manuals for D-Link DAP-1610

  Summary of Contents for D-Link DAP-1610

  • Page 1 DAP-1610 AC1200 Dual Band Wi-Fi Range Extender ual Band Wi-Fi Rang Quick Install Guide Quick Inst...
  • Page 2: Package Contents

    Package Contents DAP-1610 AC1200 Dual Band Wi-Fi Range Extender Wi-Fi Configuration Card Quick Install Guide If any of the above items are missing, please contact your reseller. Before You Begin • For setup, you will want your Range Extender to be plugged in to an available outlet as close to your Wi-Fi Router as possible.
  • Page 3: Product Overview

    Green The WPS button has been pushed and the device is Blinking establishing a connection. Signal Strength Indicator Very Weak (1 x Amber) Weak (1 x Green) Good (2 x Green) Strong (3 x Green) DAP-1610 Install Guide...
  • Page 4 Setup, on page 6. Once confirmed that the WPS light is blinking on your router, within one minute, press the WPS button on your Range Extender for 2-3 seconds. The Status LED should start to blink green. DAP-1610 Install Guide...
  • Page 5 Very Weak (1 x Amber) Weak (1 x Green) Good (2 x Green) Strong (3 x Green) Your setup is complete! To connect your wireless devices to your Range Extender, see Connect Your Wireless Devices, on page 7. DAP-1610 Install Guide...
  • Page 6 Once connected to your Range Extender, launch the QRS Mobile app, wait for the Introduction Screen Up to 30 to change to the Welcome Screen seconds (this may take up to 30 seconds), then tap Start to continue. DAP-1610 Install Guide...
  • Page 7: Connect Your Wireless Devices

    (2.4GHz or 5GHz) according to current network traffic. When enabled, you will only see one wireless network name (SSID) from your Range Extender. Your device is now connected to your Range Extender. To connect additional devices, repeat step 1. DAP-1610 Install Guide...
  • Page 8: Troubleshooting

    Note: If you have changed the Wi-Fi Network name, the device you are currently using to connect to your Range Extender will drop. You will need to go to your Wi-Fi Settings and connect to your Range Extender using the new network name and password. DAP-1610 Install Guide...
  • Page 9 Wi-Fi signal is still strong. Use the Smart Signal Indicator to help find a location with a strong signal. The more bars lit on the signal indicator, the stronger the Wi-Fi signal is. DAP-1610 Install Guide...
  • Page 10 WPS button, try again and hold it a little longer. If it still does not blink, STOP, and configure your Range Extender using Method Two: QRS Mobile Setup, on page 6. DAP-1610 Install Guide...
  • Page 11: Gpl Code Statement

    Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL.
  • Page 12: Technical Support

    Version 1.03(US)_90x130 June 21, 2019 ©2019 D-Link. All rights reserved. D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries. All other third-party marks mentioned herein may be trademarks of their respective owners. This publication may not be reproduced, in whole or in part, without prior...