Selecting Operation Mode - D-Link DAP-1610 User Manual

DAP-1610 AC1200 Wi-Fi Range Extender
Configuring via Web-based Interface
User Manual

Selecting Operation Mode

In order to connect your device to a wired router for adding a wireless network to the existing local
network, on the Device mode page, from the Connection method list, select the Wired
connection value. In this mode you can change the LAN IP address, set your own settings for the
wireless network and set your own password for access to the web-based interface of the device.
Figure 21. Selecting an operation mode. The Access point mode.
In order to connect your device to a wireless router for extending the range of the existing wireless
network, on the Device mode page, from the Connection method list, select the Wi-Fi value.
Then from the Work mode list select the Repeater value. In this mode you can change the LAN
IP address, connect your device to another access point, set your own settings for the wireless
network, and set your own password for access to the web-based interface of the device.
Figure 22. Selecting an operation mode. The Repeater mode.
In order to let a wired PC connected to your device access the network of a wireless router, on the
Device mode page, from the Connection method list, select the Wi-Fi value. Then from the
Work mode list select the Client value. In this mode you can change the LAN IP address, connect
your device to another access point and set your own password for access to the web-based
interface of the device.
Figure 23. Selecting an operation mode. The Client mode.
When the operation mode is selected, click the NEXT button.
Page 28 of 91