D-Link DAP-1610 User Manual page 84

DAP-1610 AC1200 Wi-Fi Range Extender
User Manual
In the opened window, you can specify the following parameters:
Parameter
Maximum TTL value
Number of probes
Wait time
To restore the default field values, click the DEFAULT SETTINGS button.
After specifying the additional parameters, click the OK button.
To run the check, click the START button. After a while, the results will be displayed on the page.
To remove the check result from the page, click the CLEAR button.
Specify the TTL (Time to live) parameter value. The default value is
30.
The number of attempts to hit an intermediate host.
A period of waiting for an intermediate host response.
Page 84 of 91
Configuring via Web-based Interface
Description