Mac Filter - D-Link DAP-1610 User Manual

DAP-1610 AC1200 Wi-Fi Range Extender
User Manual

MAC Filter

On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be
allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to
access the WLAN.
!
It is recommended to configure the Wi-Fi MAC filter through a wired connection to DAP-
1610 .
Figure 49. The page for configuring the MAC filter for the wireless network.
By default, the Wi-Fi MAC filter is disabled.
To configure the MAC filter, first you need to create rules (specify MAC addresses of devices for
which the specified filtering modes will be applied). To do this, click the ADD button.
Figure 50. The window for adding a rule for the MAC filter.
Page 63 of 91
Configuring via Web-based Interface